1000mm x 600mm - Vacuum table - Hole Grid type - DE - 84149000

​ Technical data:

• Dimensions: 1010 x 600 mm
• Clamping area: 1010 x 600 mm
• Material: Aluminium, Polyethylene
• Height: 29 mm
• Size of bottom holes: 0.3 mm
• Size of top holes: 5mm
• Hole centres: 10 mm apart
• Hose connections: 10 mm
• Adaptermat: rubber mat with holes to ensure better fastening
• NOTE: pump selection is important. Hoovers can give good performance but WARNING: Overheating possible causing fire hazard - best solution is specific vacuum pump

These Vacuum tables are made of an Aluminium/Polyethylene/Aluminium sandwich.

The suction holes are 0.3mm diameter into the larger 5mm x 5mm holes in the table. As a result, with the correct pump you do not need to cover all of the table in order to get good suction.

The pump choice is very important for good performance.

The tables are made such that the lower plate can be bolted to the T-slot and then the table can be bolted to the top of the mounted plate.

1) Bolt plate to machine

2) Mount table to plate
 

Component parts:

• 1 x Connection-adapter and hoses
• 1 x Rubber cover mat (for covering unused holes)
• 1 x Spanner for connection adapter
• 1 x vacuum table
• 1 x rubber mat with holes spacings the same as the table
• 1 x cover mat
• 1 x set of connecting tubes to large gland for duct connection