AMB (Kress) 1050 FME-P (230VAC) - DE - 84672985
*** Note - The AMB KRESS P models have a ER16 collet head system. Regular Kress collets and clamping nuts WILL NOT fit this spindle***
Advanced AMB Milling motor. In contrast to other AMB/Kress milling motors, this motor has an ER16 collet system with balanced clamping nut, which results in 3 x better repeatability of concentricity compared to regular AMB/Kress collet system. Guaranteed concentricity in the cone < 0,01 mm.
Component features:
- MAXX-Power 1050 Watt motor
- Effective power: 560W
- Speed range: 5.000 - 25.000 rpm
- Motor weight: 1,7 kg
- Slim and ergonomically-designed housing
- Full wave electronics for constant performance and speed
- Soft start-up and starting current limitation
- Special winding protection for the motor against dust and material particles
- Motor flange made of steel with double bearing for higher milling performance (43mm)
- Spindle lock for easy milling tool changes
- Electronic overload protection prevents overheat of the motor
- Carbon brush switch-off to protect the motor
- 4 m rubber rubber power cable with patented quick-action lock
- Precision collet ER16 - Ø 8 mm with balanced clamping nut included
- Compatible with STEPCRAFT Version 2 D series
- 3 x better repeatability of concentricity
- ground cone: guaranteed concentricity in the cone < 0,01 mm
Attachments
Here you will find any attachments for this item. Click on the icon to download an attachment.
![]() |
AMB 1050 FME-P Datasheet |
The AMB KRESS spindle is a brushed universal spindle. This type of spindle is like the power tools you will see in a hardware store. However, the AMB KRESS has been specifically designed as a milling spindle for CNC routers. We use the AMB KRESS extensively in our higher end production machines with great success.
The AMB KRESS P models have a ER16 collet head system.
- In contrast to other AMB/Kress milling motors, this motor has an ER16 collet system with balanced clamping nut, which results in 3 x better repeatability of concentricity compared to regular AMB/Kress collet system.
- Guaranteed concentricity in the cone < 0,01 mm.
- The AMB KRESS spindle is a brushed universal motor. After 500-1000 hours the brushes will wear out and you will need to replace them. We supply AMB KRESS brushes.
- The spindle is a single phase 220V AC spindle.
- Speed is controlled on the spindle itself via a adjustment dial.
- The spindle can be controlled for on/off from the CNC controller, however this requires additional options accessory (switchable socket) to allow the CNC controller to turn on and off the power to the KRESS.
- It is our experience that the AMB KRESS spindle is THE best entry level spindle for cost / performance / value ratio.
- The AMB KRESS 1050-1 model uses its own collet system and you must purchase these collets.
- The AMB KRESS P models have a ER16 collet head system.
Advanced AMB Milling motor. In contrast to other AMB/Kress milling motors, this motor has an ER16 collet system with balanced clamping nut, which results in 3 x better repeatability of concentricity compared to regular AMB/Kress collet system. Guaranteed concentricity in the cone < 0,01 mm.
Component features:
- MAXX-Power 1050 Watt motor
- Effective power: 560W
- Speed range: 5.000 - 25.000 rpm
- Motor weight: 1,7 kg
- Slim and ergonomically-designed housing
- Full wave electronics for constant performance and speed
- Soft start-up and starting current limitation
- Special winding protection for the motor against dust and material particles
- Motor flange made of steel with double bearing for higher milling performance (43mm)
- Spindle lock for easy milling tool changes
- Electronic overload protection prevents overheat of the motor
- Carbon brush switch-off to protect the motor
- 4 m rubber rubber power cable with patented quick-action lock
- Precision collet ER16 - Ø 8 mm with balanced clamping nut included
- 3 x better repeatability of concentricity
- ground cone: guaranteed concentricity in the cone < 0,01 mm