Menu
0
Categories
Search
Winkelmandje
Previous article Show list Next article
{canonicalURL}

AXIOM AR6+ SF CNC router (915mm x 610mm)

Article number 10372
£6.072,07 Included 20% VAT £5.060,06excl. VAT
Location: Type Location Data
Description
Features
Specifications
Videos

Axiom Small Format CNC Router

Axiom CNC offers a wide range of machines to address nearly any CNC application. Each machine has been thoughtfully designed, rigorously tested, and offers a full range of accessories to ensure that you have everything you need to get up and running.

  • Axiom CNC Industrial 4-axis CNC Controller
  • Optional 3HP Electro Spindle with integrated Liquid Cooling System
  • Interlocking Aluminium Table
  • Precision Ball Screws
  • Prismatic Guides in all Axes
  • Auto Tool Touch-off Plate
  • Travel sizes | 610mm x 610mm | 915mm | 1220mm

UCCNC CONTROLLER

The StoneyCNC spec Axiom CNC Router for the European market is fully PC based controlled by UCCNC industrial controller and software. This PC based control allows for real time feedback of machine position to minimise mistakes. There is unmatched graphical user feedback to the operator. It is compatibile with a range of common CAM packages. Most importantly it is very intuitive operation for fast learning. 

SUPPORTED LINEAR GUIDEWAYS

Our linear guideways utilise recirculating bearings between a prismatic rail and a bearing block. The coefficient of friction on our linear guides is only a small fraction of what is created by traditional round guides, and are able to take loads in all directions. With these features, our CNC machines achieve high precision and greatly enhanced moving accuracy.

Our linear guideways utilise recirculating bearings between a prismatic rail and a bearing block. The coefficient of friction on our linear guides is only a small fraction of what is created by traditional round guides, and are able to take loads in all directions. With these features, our CNC machines achieve high precision and greatly enhanced moving accuracy.

CAST GANTRY SUPPORTS

Heavy components travelling at a high rate of speed generate high forces of inertia. The horizontal gantry support (located beneath the table), and the vertical gantry legs take the brunt of that force. Each gravity cast aluminium component is powder coated and engineered to be completely overqualified for their job.

Heavy components travelling at a high rate of speed generate high forces of inertia. The horizontal gantry support (located beneath the table), and the vertical gantry legs take the brunt of that force. Each gravity cast aluminium component is powder coated and engineered to be completely overqualified for their job.

STRUCTURAL STEEL FRAME

Structural Steel Frame

You wouldn’t build a home on a compromised foundation… Nor should you build a CNC router on one.  Our welded, structural steel frame is heavy, rigid, and accurate. It supports the weight of your Axiom machine with ease.  It also offers mounting flanges in each corner to secure your machine to an optional Axiom stand, or your work surface.

INTERLOCKING ALUMINIUM TABLE

Interlocking Aluminium Table

This is a seriously strong table.  The massive 30mm thick extruded aluminium table provides a strong, flat surface to support your material.  Integrated T-slots allow placement of hold-down clamps in any location, and a sacrificial MDF spoil board ensures that your table will always remain flat and damage free.

HIGH PRECISION BALL-SCREWS

High Precision Ball-Screws

Motion on every axis of every Axiom machine is controlled by high-precision ball screws.  These ball screws utilise recirculating ball bearings to provide close tolerance and offer unmatched accuracy.  Their ability to create low internal friction, while withstanding high thrust loads at high rates of speed, is paramount to the accuracy of each Axiom CNC machine.

HIGH TORQUE STEPPERS

High Torque Steppers

Each axis is controlled by a 57mm, NEMA 23 equivalent high-torque stepper motor. Each fast, device is rated for high duty cycles, and will provide thousands of hours of trouble-free precision.

INDUSTRIAL CONNECTORS

Industrial Power and Data Connectors

The performance of your machine relies upon accurate transfer of data to the stepper motors. Every wire connector found an an Axiom machine is of the highest quality available. Where available, we use aerospace quality components with metal body, copper terminals, and threaded locking rings.

ONBOARD COOLING SYSTEM

Onboard Cooling System

Every Axiom machine offers the option of a liquid-cooled electro spindle.  Our innovative system replicates an automotive cooling system, where a high-volume pump pushes coolant (or antifreeze) through through the electro spindle, and dissipates the heat with a radiator and fan assembly. No buckets, no hoses, no aquarium pumps.  No Drama.

CABLE TRACK CHAIN

Cable Track Chain

A loose bundle of wires almost always results in abrasion, stress and broken leads. Our power and data cables, as well as cooling hoses, are contained within lightweight, flexible nylon track chains to ensure that data is never interrupted by a broken wire.

TOOL TOUCH-OFF SENSOR

Tool Touch-off Device

Each time you install a bit in your Axiom CNC machine, you’ll need to accurately determine the length of the new tooling. Simply slide the tool touch-off device beneath the bit, initiate the ‘Auto Touch-Off’ command on your UCCNC interface, and the bit length will automatically be determined and stored in the UCCNC software.

PROXIMITY SENSORS

These magnetic sensors act as the CNC's eyes. They allow you to ‘home’ your machine so it knows where the spindle is in relation to the working envelope. Noticeably absent in many of our competitor’s machines, these sensors prevent the gantry from colliding with the stops when you run it to the extent of its travel.

These magnetic sensors act as the CNC’s eyes. They allow you to ‘home’ your machine so it knows where the spindle is in relation to the working envelope.  Noticeably absent in many of our competitor’s machines, these sensors prevent the gantry from colliding with the stops when you run it to the extent of its travel.

STONEYCNC after sales service

  • As an official OEM partner with the UCCNC developers we feel at STONEYCNC that a CNC system is far more approachable and easier to use when running on the UCCNC controller
  • The reliability of the AXIOM CNC and the UCCNC controller are the perfect match!
  • At STONEYCNC we have an acute focus of customer service and support that is continuously evolving based on feedback from the field where our machines are working daily
  • The strength of our relationship with the UCCNC developers, together with the reliability of their motion controllers has been the key to providing exceptionally reliable CNC systems that are easy to use
  • An AXIOM CNC system running on the UCCNC controller is running on years of our teams experience in supplying and supporting UCCNC controlled CNC routing systems
  • Every system we supply runs on the UCCNC controller and you are future proofing your investment for future upgrades
  • We can remote login and reconfigure any AXIOM CNC system in less than 30minutes should you have any issues with your PC

Please note: Stand, spindle and accessories are optional extras for this model

  • Aluminium Tslot table and MDF spoil board fitted
  • Vacuum table systems available
  • Stiff steel core carcass frame
  • Cast up-stands rigid and aligned by design
  • Inductive proximity sensors on XY and Z
  • Ballscrew drives on XY and Z
  • Supported linear rails on XY and Z
  • Full robust cable management system on XY and Z
  • Industrial controller fully supported on UCCNC
  • Ethernet connectivity between machine and control PC
  • 5000mm/min XY travel rapid feed
  • Industrial electrical connections between machine and controller
  • Offered with KRESS or high powered AXIOM HF spindle
  • Travel sizes | 610mm x 915mm
STONEYCNC AXIOM AR6 AXIOM specifications
Travel in X axis 610mm
Travel in Y axis 915mm
Travel in Z axis 153mm
Overall footprint 1300L x 950W x 770H (mm)
Dimensions when shipped crated 1347 x 990 x 840 (mm)
Machine weight 135 kg
Bottom of collet to T-slot table height 165mm
Rapid Feed rate 5000mm/min (83mm/sec) in XY
2000mm/min (33mm/sec) in Z
Spindle Options High power water cooled HF spindle | Single phase KRESS spindle
Software Compatibility Ethernet controller running UCCNC software
Drive system Electronics High power stepper motors
Limit and homing sensors Inductive sensors running on 12V DC on XY and Z
Drive system 16mm Ballscrew drives on XY and Z
Thrust support Double angle contact bearings preloaded at thrust end of ballscrew support
Linear motion system Profiled linear rails on all axes.
Cable management Full cable management on all axes
Core components Steel base | Cast Y cross member and up stands | Custom Aluminium extrusion bridge
Machine bed T-slot table with integrated MDF spoil-board as standard
Tool length sensing Configured for conductive tool touch off sensing