Entry Level 3mm Single Flute Up cut (3.175mm) 1/8 shank - IN - 82077010
Article number 10010
£4,92
Included 20% VAT
£4,10excl. VAT
Location: WS-08-02-05
Cutter Type
End MillFishtail End Mill
Shank Diameter mm
1/8“ - 3.175mm
Cutting Diameter mm
3.
Number of Flutes
1
Cutting Direction
Up Cut
Description
Specifications
|
Cutter Ø mm |
Cutting Length mm |
Shank Ø mm |
Flute Type |
Cutting Direction |
Cutter Composition |
Cutter Type |
Applicable Materials |
Cutter Quality |
|---|---|---|---|---|---|---|---|---|
|
3 |
10 |
3.175 (1/8") |
Single |
Up Cut |
Solid Carbide |
Fishtail End Mill |
Wood / Plastics / Aluminium |
Standard Quality |
The single fluted down cut spiral cutters with 1/8th inch shank come in cutting diameters of 2mm and 3mm. It is best to use a 1/8th inch collet to load these cutters into your machine. The single fluted cutters have much better chip removal than the dual fluted cutters. The single fluted cutters are excellent in softer materials like plastics
Component features:
- Solid Carbide-End Mill
- Single-Flute
- Upcut-spiral
- Available as ø2mm and ø3mm
Cutter Type
End MillFishtail End Mill
Shank Diameter mm
1/8“ - 3.175mm
Cutting Direction
Up Cut
3mm Single Flute Up cut 1/8th inch shank
Technical Specifications:
- Solid Carbide-End Mill
- 3mm Diameter Cutter
- Recommended cutting depth up to 15mm deep
- Single-Flute
- Flat Bottom
- upcut-spiral
- Shank: 3.175mm (1/8")
- Requires a 1/8th inch collet
- Overall length: 38mm
Applications
- High quality contours
- As only one Flute, much space for chip evacuation
- Very good for softmaterials
- Soft plastics
- PE, Teflon, Plexiglass, Styrodur
- Soft Aluminium