Fogbuster 1/2 Gallon Coolant Sprayer Set Single Nozzle - US - 84242000

Please see below to configure your product. 

The FogBuster system is designed to produce a stream of air and coolant together without creating a fog or atomized mist. The low pressure, high volume sprayer provides a targeted spray to the cutting area and the work-piece without atomizing the coolant droplets. Therefore no unwanted (and potentially harmful) coolant mist is generated where the sprayer is operating. This makes the environment where the system operates significantly safer.

The system is compatible with a wide range of coolant types (recommended mix 8-10% coolant 90-92% water) and works well even at pressures as low as 10 PSI. All the coolant is targeted at the cutting area through the brass sprayer nozzles. The absence of airborne oil based pollutants reduces the health risks associated with mist coolant systems significantly. The system provides a very clean and controllable way of directing coolant to a cutting operation.

The sprayer nozzles have adjustable valves that can be used to reduce the amount of coolant to a minimum. The FogBuster can also be used on conventional machines with excellent results and can even in some instances replace flood coolant systems

Component features:

• Regulator included
• Half Gallon Container
• Dual nozzle spray delivery options
• Standard 5 foot of tube between coolant container and nozzle (extended lengths are available on request)
• Standard 5 inch brass delivery nozzle
• Magnetic mount included
• Manual Check Valve included (solenoid control available)

Minimum recommended Pre-requisites:

• 2 horsepower 50 Litre air compressor

Recommended Pre-requisites:

• 3 horsepower 200 Litre air compressor