Menu
0
Categories
Search
Winkelmandje
Previous article Show list Next article
{canonicalURL}

Industrial quality small HF spindle

Article number 10310
£765,26 Included 20% VAT £637,72excl. VAT
Location: Type Location Data
Description
Related Products
Features
Specifications
Related Products

Industrial quality HF spindle system that will run on an LPT connector to control the on/off and spindle speed functionality. This spindle can be controlled with the STECRAFT machine directly if the correct adaptor cable is also purchased. This spindle is self cooling, fully balanced and has double angle contact bearings of very high quality. This is an industrial grade three phase motor system The spindle is driven by industrial Variable frequency drive (VFD). The VFD has overcurrent, over temperature and other important safety features to help protect your motor over the course of its life. We have been using VFD's in our commercial machines for years.

Component features:

  • 43mm head which fits into the commonly used 43mm heads in CNC routers
  • Industrial quality three phase motor
  • Drive system is powered by single phase
  • No need for three phase power and still you have the advantage of an industrial three phase spindle
  • VFD powered drive system for the ultimate protection of your motor
  • Motor can run 24/7 365
  • Double angle contact bearings fully sealed
  • Motor fully balanced and run in at the factory
  • 0-24000RPM
  • CNC controlled with LPT connection
  • Compatible with the STEPCRAFT machine with the adaptor cable we can provide.
  • Italian spindle - NOTE this is NOT like the Chinese DC motors you see on ebay. This is a very high quality spindle

The Industrial quality small HF spindle is designed to give an industrial spindle option to the STEPCRAFT D series. The spindle is also applicable in a number of other applications in other machines.

  • The spindle is a three phase AC industrial motor and is driven using a variable frequency controller. The system is exactly as its summarised - it is a minature industrial CNC spindle that retains all the performance and reliablity of the larger spindle systems of this type. 
  • The INDUSTRIAL motor is a three phase AC motor with full industrial operation in mind.
  • The variable frequency controller and high quality AC mains power components allows fully fused over current and over temperature protection of the motor
  • The spindle is  manufactured, tested, balanced, tested again and rebalanced. 
  • Any customers who have used this system have rated the performance much higher than any other spindle in this class.

Industrial quality small HF spindle specifications are below

  • Spindle speed up to 24,000 RPM
  • Industrial grade double angle contact bearings
  • Multi mounting option 1: 43mm mounting collar needed to mount the spindle 
  • Multi mounting option 2: The spindle has tapped holes for a more robust connection to the machine
  • ER11 collet allowing cutters up to 8mm to be loaded (extra care is required when loading cutters larger than 8mm into the machine
  • Precision ground collet cone for exceptional runout tolerances
  • Fully self cooling and balanced spindle
  • Variable speed from 5000-24000 RPM
  • Variable frequency controlled device
  • Motor over temp protected
  • Motor over current protected
  • Pop out Fuse on controller
  • AC mains igh quality filter
  • High qualiry industrial rocker switch on mains power
  • DB25 connector into controller
  • PWM signal applied will results in full spindle speed control from the softere
  • Digital high/low signal will control the spindle power state (on / off)