Menu
0
Categories
Search
Winkelmandje
 
{canonicalURL}

Universal OPT Laser PLH3D-6W-XF Kit for CNC machines - PL - 90132000

Article number 11025
£927,69 Included 20% VAT £773,07excl. VAT
Location: WS-09-03-05
Description
Specifications
Videos
Attachments

PLH3D-6W-XF  Universal Kit for CNC / 3DP machines includes all needed parts to connect your laser head to a machine.
Includes Magnetic LaserDock and 43 mm Nozzle.
Accepts all types of signals: Analog 0-5 V, Analog 0-10 V, PWM/TTL 0-5 V, 0-10 V and 0-24 V.
Allows connecting to any type of the CNC controller output connector and any type of signal modulation. Everything you need is included!

Included parts

- PLH3D-6W Universal Adapter for CNC/3DP Machines

- PLH3D-6W-XF Laser Head

- PLH3D-6W LaserDock - Magnetic Docking Station

- PLH3D-6W Magnetic Nozzle - 43 mm Spindle Adapter

- High-resolution Engraving Lens with PLH3D Lens Regulator (Factory-preset)

- High-efficiency Engraving Lens

- Safety Goggles for 450 nm

  

Note: you may receive the laser safety goggles with a slightly different frame. However, the Optical Density rating, as well as Working Wavelengths, will be the same.

Universal Plug&Play Adapter for PLH3D-6W Series includes:

- 5-meter long electrical wire with pins

- 19 V, 2.5 A PSU (comes with European, North America, and UK AC plugs)

- connector strip for lengthening the wires if needed

- on-cable switch

- plug to plug adapter (for different accessories)

- a universal set of 7 types of wires for all types of output connectors

All types of CNC control signals

Use only one input during the connection!

Universal adapter allows connecting all types of signals used in CNC machines.

All input wires are labeled for ease of use.

Analog modulation 0 - 5 V

Analog modulation 0 - 10 V

TTL/PWM modulation 0 - 5 V

TTL/PWM modulation 0 - 10 V

TTL/PWM modulation 0 - 24 V

7 types of wires - universal connectors

Description of connectivity wires for different physical connectors available in your CNC machines. Simply choose the one which fits your machine!

Universal Kit Pins

1. Male gold pin header connector -  allows connecting to a gold pin female connector. One needs to find two slots responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply plug the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.  

2. Tinned copper wires -  allows connecting to SMD or THT of the CNC controller. One needs to find two vias/holes or parts on the PCB responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply solder the wires to the part of the PCB board of the controller, the blue wire to the GND signal and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.

3. Female gold pin header connector -  allows connecting to a gold pin male connector. One needs to find two pins responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply plug the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.  

4. Insulated wire end sleeves - allows connecting to terminal blocks and screw connectors. One needs to find two terminals of a connector responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply insert the blue wire to the GND terminal and red wire to the modulation signal terminal which is used by the machine to operate the laser and tighten the screws. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.

5. Male D-SUB connector -  allows connecting to any kind of a female D-SUB connector. One needs to find two slots responsible for modulation signal. Analog output 0-5V or Analog output 0-10 V or TTL/PWM output, and GND. Simply plug the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter. 

6. Press fit male gold pin header connector -  allows connecting to a gold pin male connector. One needs to find two vias/holes in the PCB responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply press the connector into the via/hole in the PCB board of the controller, the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.    

7. Female D-SUB connector - allows connecting to any kind of a male D-SUB connector it can also be used to connect to other types of connectors which are using male pins. One needs to find two pins responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply plug the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.

 Caution:
Remember that it is not a toy.
Laser radiation is dangerous even when scattered or reflected from any surface.
Always use proper protection laser filter on your CNC machine dedicated to 430 - 480 nm in order to avoid reflected radiation.
Never point laser head at people or animals.
Do not touch the beam, it may cause burns or another injury. 
Do not stare at the beam or the beam spot while the material is being cut.

Laser radiation - Avoid eye or skin exposure to direct or scattered radiation. 

Class 4 laser product.

Attachments

Here you will find any attachments for this item. Click on the icon to download an attachment.

4636_20190617152439_laser-head-plh3d-6w-optlasers.com.pdf PLH3D-6W Series Operating Manual
4636_20190617152439_laser-head-test-1-plh3d-6w-optlasers.com.pdf Materials Processing #1
4636_20190617152440_laser-head-test-2-plh3d-6w-optlasers.com.pdf Materials Processing #2
4636_20190617152654_g-code-generator-optlasers.com.rar G-code generator
4636_20190617152442_start-guide-for-plh3d-6w-xf-full-kit-optlasers.com.pdf Start Guide for PLH3D 6W-XF Full Kit for X-Carve
4636_20190617152443_Opt-Lasers-PLH3D-6W-Acro-Openbuilds-Laser-Head-Connection-EN.pdf Connecting PLH3D-6W Laser Heads to
Openbuilds Acro-System: Getting Started Guide
4636_20190617152444_mach-3-configuration-optlasers.com.pdf OPT Laser Mach 3 Configuration guide
Dimensions 40 x 55 x 78 mm
Focal Length 20 - 120 mm
Focused Beam Spot Size @ 30 mm 0,1 x 0,1 mm
Focused Beam Spot Size @ 55 mm 0,1 x 0,125 mm
Focused Beam Spot Size @ 80 mm 0.1 x 0.3 mm
Input Voltage 12 - 24 V
Max. Power Consumption 30 W
Noise 58 dBA
Weight 210 g (7.4 oz.)
Mounting Hole Type M3 x 0.5 x 4.5 mm
Ambient Temperature Range (Operating) 0 - 45°C (32 - 113°F)
Mounting Hole Pattern 4 Holes 24 x 15 mm (0.94 x 0.59 in.)
Modulation Input 1 0 - 5V Analog/TTL/PWM
Modulation Input 2 0 - 24V TTL/PWM
Max. Modulation Bandwidth 30 kHz
Laser Diode Wavelength 450 nm
Laser Diode Optical Power 6 W
Cable Length 5 m